Multistate and On‐Demand Smart Windows

Composite films consisting of wrinkles on top of the elastomeric poly(dimethylsiloxane) film and a thin layer of silica particles embedded at the bottom is prepared as on-demand mechanoresponsive smart windows. By carefully varying the wrinkle geometry, silica particle size, and stretching strain, different initial optical states and a large degree of optical transmittance change in the visible to near infrared range with a relatively small strain (as small as 10%) is achieved. The 10% pre-strain sample has shallow wrinkles with a low amplitude and shows moderate transmittance (60.5%) initially and the highest transmittance of 86.4% at 550 nm when stretched at the pre-strain level. Stretching beyond the pre-strain level leads to a drastic decrease of the transmittance at 550 nm, 39.7% and 70.8% with an additional 10% and 30% strain, respectively. The large drop of optical transmittance is the result of combined effects from the formation of secondary wrinkles and nanovoids generated around the particles. The 20% pre-strain sample has wrinkles with a moderate amplitude, showing 36.9% transmittance in the initial state, and the highest transmittance of 71.5% at 550 nm when stretched to the pre-strain level. Further stretching leads to increased opacity similar to that seen from the 10% pre-strain sample.