Additive manufacturing (AM) of high-strength aluminum alloys can allow unique function and high-performance, which can be beneficial for naval applications. Many high-strength aluminum alloys such as aluminum alloy 7075 (AA7075) pose challenges during AM due to cooling rates and resultant cracking. Although successful implementation of nanoparticles to alter the microstructure to adjust cooling rates have been used for AM of AA7075, it is desirable to use the pure alloy, which is much more readily available. This research aims to use liquid metal jet printing (LMJP) to print pure AA7075 parts without cracking defects. The LMJP fills a ceramic crucible with molten aluminum wire where a magnetohydrodynamic (MHD) force is applied to deposit molten droplets onto a high temperature bedplate that limits solidification and cooling rates of the droplets. This research analyzes the effects of bedplate temperature and air temperature on the amount of cracking and porosity present. Testing of hardness and tensile strength is conducted using microhardness and Instron tester. Material characterization is performed using X-ray diffractometry (XRD), optical microscopy (OM), and energy dispersive X-ray spectroscopy (EDS) and fractography is performed using scanning electron microscopy (SEM). Air temperature analysis is conducted using finite element method (FEM) modeling through ANSYS.