材料科学
制作
铜
复合数
复合材料
腐蚀
冶金
防腐
化学镀
金属基复合材料
作者
Yixiao Cao,Junying Li,Ying Wang,Liang Dong,Fei Chen
标识
DOI:10.1016/j.ijoes.2026.101558
摘要
ABSTRACT Cellulose nanofibril (CNF) was introduced to modify zeolitic imidazolate framework‑8 (ZIF‑8) loaded with 2‑mercapto‑5‑amino‑1,3,4‑thiadiazole (AMT) for fabricating CNF/ZIF‑8@AMT composite nanocontainers. The as‑prepared nanocontainers were incorporated into polyvinyl butyral (PVB) matrix to obtain anti‑corrosion composite coatings. Electrochemical measurements, scratch morphology observation, nanoindentation test and adhesion measurement were utilized to compare the anti‑corrosion and mechanical properties of the two coating systems. The results show that although CNF/ZIF‑8@AMT can effectively encapsulate AMT corrosion inhibitor and realize its controlled‑release capability, the intrinsic hydrophilicity of CNF triggers interfacial defects and micropores within the PVB coating upon immersion in corrosive media. Electrochemical results reveal that the PVB/(CNF/ZIF‑8@AMT) coating exhibits considerably lower impedance, higher corrosion current density and more severe scratch damage compared with PVB/(ZIF‑8@AMT). Mechanical tests demonstrate that the hardness and modulus of the PVB/(CNF/ZIF‑8@AMT) coating are only increased by 23.8% and 11.8%, with an adhesion strength of 8.04 MPa, which are far inferior to the improvement achieved by the PVB/(ZIF‑8@AMT) system. This study uncovers the dual‑sided effect of CNF in constructing nanocontainers for protective coatings.
科研通智能强力驱动
Strongly Powered by AbleSci AI