材料科学
热重分析
循环伏安法
介电谱
差示扫描量热法
扫描电子显微镜
电化学
分析化学(期刊)
法拉第效率
镁
阳极
电极
化学工程
冶金
化学
物理化学
复合材料
有机化学
工程类
物理
热力学
作者
Partha Saha,Prashanth Jampani,Moni Kanchan Datta,Daeho Hong,Bharat Gattu,Prasad Prakash Patel,Karan Sandeep Kadakia,Ayyakkannu Manivannan,Prashant Nagesh Kumta
出处
期刊:Nano Research
[Springer Science+Business Media]
日期:2017-08-15
卷期号:10 (12): 4415-4435
被引量:52
标识
DOI:10.1007/s12274-017-1695-z
摘要
High energy mechanical milling (HEMM) of a stoichiometric mixture of molybdenum and metal chalcogenides (CuT and MoT 2 ; T = S, Se) followed by heat treatment at elevated temperatures was successfully applied to synthesize Chevrel phases (Cu 2 Mo 6 T 8 ; T = S, Se) as positive electrodes for rechargeable magnesium batteries. Differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to understand the phase formation following milling and heat treatment. CuS and Mo were observed to react at 714–800 K and formed an intermediate ternary Chevrel phase (Cu 1.83 Mo 3 S 4 ), which further reacted with residual Mo and MoS 2 to form the desired Cu 2 Mo 6 S 8 . Quantitative XRD analysis shows the formation of a ∼96%–98% Chevrel phase at 30 min following the milling and heat treatment. The electrochemical performance of de-cuprated Mo 6 S 8 and Mo 6 Se 8 phases were evaluated by cyclic voltammetry (CV), galvanostatic cycling, and electrochemical impedance spectroscopy (EIS). The results of the CV and galvanostatic cycling data showed the expected anodic/cathodic behavior and a stable capacity after the first cycle with the formation of Mg x Mo 6 T 8 (T = S, Se; 1 ≤ x ≤ 2). EIS at ∼0.1 V intervals for the Mo 6 S 8 electrode during the first and second cycle shows that partial Mg-ion trapping resulted in an increase in charge transfer resistance R e . In contrast, the interfacial resistance R i remained constant, and no significant trapping was evident during the galvanostatic cycling of the Mo 6 Se 8 electrode. Importantly, the ease of preparation, stable capacity, high Coulombic efficiency, and excellent rate capabilities render HEMM a viable route to laboratory-scale production of Chevrel phases for use as positive electrodes for rechargeable magnesium batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI