材料科学
电介质
退火(玻璃)
高-κ电介质
电容器
结晶度
氧化物
等效氧化层厚度
原子层沉积
薄膜
氮化物
光电子学
泄漏(经济)
复合材料
图层(电子)
纳米技术
栅氧化层
电气工程
冶金
电压
晶体管
工程类
经济
宏观经济学
作者
Chun-Yuan Wang,Hung-Chih Huang,Chun-Yi Chou,Hsing-Yang Chen,Chen-Hsiang Ling,Hsin-Chih Lin,Miin‐Jang Chen
标识
DOI:10.1021/acsaelm.2c01287
摘要
A high-quality nanoscale oxide layer with a high dielectric constant and a low leakage current prepared at a low thermal budget is critical to advanced metal–insulator–metal (MIM) devices. In this study, the film density, crystallinity, dielectric constant, and leakage current of the ZrO 2 thin film are significantly improved by the atomic layer annealing (ALA) and the titanium nitride (TiN) capping layer effect at a low process temperature of only 300 °C without any postannealing treatment. Hence a high ZrO 2 dielectric constant of 35.2, a low equivalent oxide thickness of 0.64 nm, and a leakage current density lower than 10 –7 A/cm 2 are demonstrated in the MIM capacitors. This study demonstrates the significant impacts of the ALA and capping layer effects on the film quality and electrical characteristics of nanoscale thin films for high-performance devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI