MoS2/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO3 bilayer hollow nanofiber membrane: Photocatalytic filtration and piezoelectric effect enhancing degradation and disinfection

A novel MoS2/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO3 bilayer hollow nanofiber membrane (PPBM-H) was successfully synthesized by coaxial electrospinning technique. In the nanofiber, BiFeO3 nanoparticles (NPs) and MoS2 nanosheets (NSs) were loaded in the middle and outer layers of the PANI/PAN composites, respectively, which constructs a type II heterojunction with spatially separated microtopography, thus significantly improving the charge separation in photocatalysis. Moreover, the hollow structure and the vast number of exposed groups on the surface of PPBM-H help to improve the mass transfer efficiency and pollutant adsorption performance in wastewater treatment. In addition, PPBM-H can generate H2O2 by in-situ activation of BiFeO3/MoS2 for photo-Fenton catalysis, enabling Fe3+ and Fe2+ recycling. Also, PPBM-H can produce piezoelectric polarisation under ultrasonic excitation, which can further enhance the efficiency of electron/hole separation and transfer, and induce the generation of active free radicals. Owing to its wonderful self-cleaning effect, the PPBM-H has good mechanical strength (2.95 Mpa), hydrophilicity (11.6°), water flux (1248 L·m-2·h-1), BSA rejection (98.8 %), and exhibits distinguished photocatalytic filtration efficiencies (99.5 % tetracycline hydrochloride (TCH) and 99.9 % methyl orange (MO) within 60 min), piezo-photocatalysis (99.2 % TCH within 2 h), disinfection performance for Escherichia coli (E. coli) (100 %, within 60 min).