The Plasma Electrolytic Oxidation of Aluminum Using Microsecond-Range DC Pulsing

This manuscript presents the results of our recent work focused on the plasma electrolytic oxidation of aluminum in a sodium tungstate solution using a microsecond-range pulsed DC signal. DC pulses of 50, 300 and 900 μs were followed by 5- and 25-times longer pauses between the pulses, showing the effect of the pulse duration and duty cycle on the morphological, phase and chemical properties of formed oxide coatings. It is shown that all coatings are partially crystalline with gamma-alumina, WO3 and metallic W phases present in formed PEO coatings. A higher duty cycle value results in the higher crystallization of the obtained PEO coatings. Although the chemical composition of the obtained coatings is not very sensitive to processing parameters, their roughness and porosity change significantly, as well as their thickness. The photocatalytic activity and photoluminescence properties of the obtained coatings are dependent on their morphology and chemical composition, i.e., on the processing time. The highest photoactivity and photoluminescence intensity is observed for the coating formed with ton = 300 μs and toff = 25 ton. A comparable application potential is found for the sample processed with ton = 50 μs and toff = 25 ton, which requires considerably less energy for PEO processing.