串联
选择性
催化作用
电解
还原(数学)
材料科学
铜
无机化学
分析化学(期刊)
化学工程
化学
冶金
物理化学
电极
环境化学
有机化学
复合材料
工程类
数学
几何学
电解质
作者
Jonas Weidner,Christian N. Tchassem,Debanjan Das,Ridha Zerdoumi,Guilong Lu,Xin Wang,Martin Muhler,Nivedita Sikdar,Wolfgang W. Schuhmann
标识
DOI:10.1002/celc.202400664
摘要
Abstract Electrochemical CO 2 conversion is an important strategy to produce high‐value carbon‐containing molecules, such as ethylene and ethanol. Despite huge progress in recent years concerning CO 2 reduction catalyst development with increased selectivity, high selectivity for C 2+ products at high current densities is still a challenge. We report the development and optimization of a new surface Al‐rich Cu/CuO x catalyst with high selectivity for C 2+ ‐products at high current densities of up to −800 mA cm −2 . We integrated the corresponding catalyst‐modified gas‐diffusion electrode into a second flow‐through electrolyzer, which was connected to a first flow‐through electrolyzer comprising a highly CO‐selective Ni−Cu dual‐atom N‐doped carbon catalyst. The enrichment of the CO 2 stream with CO generated at a current density of −400 mA cm −2 in the first electrolyzer increased the production rate of ethanol formation at the Al‐rich Cu/CuO x catalyst at a current density of −300 mA cm −2 by 28 %, while maintaining the production rate of ethylene. Thereby, the overall yield of C 2+ ‐products obtained by CO 2 reduction was significantly increased.
科研通智能强力驱动
Strongly Powered by AbleSci AI