阳极
材料科学
分离器(采油)
复合材料
电镀(地质)
多孔性
加工硬化
冶金
微观结构
热力学
电极
地球物理学
物理
地质学
物理化学
化学
作者
Julia Meyer,Partha P. Mukherjee,Lincoln N. Collins,Scott Alan Roberts
标识
DOI:10.1002/aenm.202404175
摘要
Abstract Lithium anodes show great promise in commercial applications, but are hindered by lithium plating and dendrite growth which cause safety concerns during long‐term cell operation. Stack pressure is experimentally observed to improve cell lifetime; however, the relationship between stress and lithium deposition has remained difficult to elucidate. In this work, a transient, 3D, finite‐element model of the evolution of a lithium anode due to stripping and plating is developed. The evolution of a microscale protrusion on the anode surface is tracked over one charge‐discharge cycle with respect to stack pressure and lithium yield strength. Lithium plastic deformation, nonconformal anode‐separator contact, and separator porosity effects are accounted for. Over the course of several hours of stripping/plating, the anode surface evolves to a similar morphology under pressure regardless of the initial conditions due to lithium plastic deformation and hardening. The rate of this evolution highly depends on the applied pressure and assumed lithium yield strength.
科研通智能强力驱动
Strongly Powered by AbleSci AI