Investigation of Flexural Bearing Behavior of Corroded RC Strengthened with U-Type TRC

In this study, the flexural bearing behavior of corroded reinforced concrete (RC) beams reinforced with U-type Textile Reinforced Concrete (TRC) was investigated using a four-point bending loading method. Nine test beams were produced: one original beam, three RC beams with corrosion alone, and five corroded beams strengthened with U-type TRC. The analysis focuses on assessing the impacts of the steel corrosion degree and the number of textile layers on various aspects of the bending behavior, such as failure modes, bearing capacity, and load displacement curves, in U-type TRC-strengthened corroded beams. The experimental results revealed three distinct failure modes in the U-type TRC-strengthened corroded beams. TRC effectively enhanced the bearing capacity. With sufficient textile layers, it can be restored to the level of the original RC beams. Moreover, in the cases of severe corrosion in RC beams, the bearing capacity increased more significantly. The TRC also enhanced the ductility. Finally, a calculation equation for the ultimate bearing capacity of U-type TRC-strengthened corroded beams was presented and validated, demonstrating consistent alignment with the experimental data.