Impact of particle arrangement and model dimensions on DEM modeling of high-speed railway ballasted tracks in 2D and 3D

Modelling railway projects has a main challenge in the discrete element method (DEM). The granular material of the embankment consists of millions of fine angular particles which are difficult to model due to the long computational time. The long computational time also prevents the modeling of the higher number of loading cycles. As a result, researchers prefer to simulate the project in 2D to accelerate the simulation. While 2D simulations present a seemingly simple option for modeling railways, they tend to oversimplify the intricacies of particle interactions and the distribution of stress. Nonetheless, the extent to which these simplifications affect the authenticity of the simulations has remained ambiguous. In this study, the periodic cell replication method is used to build extensive long railway tracks significantly faster than conventional methods. Then, this DEM model is calibrated against the measurement results of a physical full-scale ballasted track. The model is then used to simulate several railway projects with different initial particle arrangements and model dimensions in both 2D and 3D. The results show that the 2D models are more dependant on the initial particle arrangement which shows different behavior for the same model. In addition, 2D simulations are incapable of reproducing the principal stress rotation in granular layers due to the moving load of the train wheel. As a result, 3D DEM simulations using the periodic cell replication method is suggested for studying the railway tracks.