Synthesis and Characterization of Polyurethane Acrylate with Bio-oil Modification for Photo-curing 3D Printed Flexible Structures

The use of renewable resources for additive manufacturing has grown significantly as a means of advancing the ongoing shift to a green economy. This study uses bio-oil generated from the rapid pyrolysis of forest waste as a bio-based chemical to partially replace polyethylene glycol to synthesize a new type of bio-oil modified polyurethane acrylate, used in photo-curing 3D printing technology. The study explores the impact of the ratio of bio-oil to polyethylene glycol on the properties of polyurethane resin. As the amount of bio-oil added increases, the molecular weight of polyurethane acrylate decreases. Modified photosensitive resin showcases better suitability for photo-curing 3D printing, with lower viscosity and volume shrinkage, and its printed samples exhibit enhanced mechanical strength and improved thermal stability. In particular, when the bio-oil substitution rate is 20wt%, the tensile strength of the 3D printed sample increases by 70%, and the double bond conversion rate reaches 58.07%. Meanwhile, the hollow and branching structures of 3D printing have the characteristics of high precision and flexibility. Introducing bio-oil into 3D printing technology not only expands the application fields of bio-oil but also provides new considerations for the transition of photosensitive resins from petroleum-based to renewable fields.