多物理
定子
磁铁
机械工程
转子(电动)
有限元法
工程类
功率(物理)
虚拟样机
快速成型
计算机科学
结构工程
物理
量子力学
作者
Jian Li,Yang Lu,Yun‐Hyun Cho,Ronghai Qu
标识
DOI:10.1109/tia.2019.2907890
摘要
This paper presents a design process and a detailed multiphysics analysis of an axial-flux permanent-magnet synchronous machine for large-power direct-drive applications. The machine in this paper is 130 kW at 26 r/min with a dual-stator inner-rotor structure. A stator core that is assembled with segmented and prewound teeth is first proposed and applied in a large-power axial-flux permanent-magnet machines (AFPMs). Through this method, the challenges of manufacturing large-diameter AFPMs can be solved. A novel water-cooling system is embedded in the machine to transfer the heat. In addition, the assembling procedure and the manufacture process are also proposed, and a novel distributed follower bearing is used to reduce the deformation and stress of the rotor disk. Finally, based on the multiphysics design, a prototype machine is manufactured and tested. The experiment results match well with the finite-element analysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI