Silver ink experiments for silicon solar cell metallization by flexographic process
作者
S. Thibert,Didier Chaussy,Davide Beneventi,Nadège Reverdy-Bruas,J. Jourdan,Bernard Béchevet,Simon Mialon
出处
期刊:Conference record of the ... IEEE Photovoltaic Specialists Conference [Institute of Electrical and Electronics Engineers] 日期:2012-06-01卷期号:: 002266-002270被引量:11
标识
DOI:10.1109/pvsc.2012.6318049
摘要
The metallization of silicon solar cells becomes more and more critical due to the recent soaring prices of silver. Flexographic printing can be used to deposit the seed layer in a “seed and plate” scheme to replace screen printing, classically employed in production lines but limited by its resolution. To develop the process, several inks prepared from standard screen printing paste were tested. First, different rheological experiments were performed. Then the different inks were printed on silicon solar cells and a correlation was pointed out between rheological properties and printing results. The present work demonstrates that flexography is a potential candidate to deposit silver seed layer with a width as low as 30 μm with a printing speed of 0.5 m/s. Moreover the importance of rheological experiments during a printing process development is underlined.