飞轮
汽车工程
机器人
能源消耗
扭矩
电动机
计算机科学
执行机构
惯性
模拟
机械工程
工程类
电气工程
物理
热力学
人工智能
经典力学
作者
Sangok Seok,Albert Z. Wang,Meng Yee Chuah,Dong Jin Hyun,Jongwoo Lee,David M. Otten,Jeffrey H. Lang,Sangbae Kim
出处
期刊:IEEE-ASME Transactions on Mechatronics
[Institute of Electrical and Electronics Engineers]
日期:2014-08-19
卷期号:20 (3): 1117-1129
被引量:601
标识
DOI:10.1109/tmech.2014.2339013
摘要
This paper presents the design principles for highly efficient legged robots, the implementation of the principles in the design of the MIT Cheetah, and the analysis of the high-speed trotting experimental results. The design principles were derived by analyzing three major energy-loss mechanisms in locomotion: heat losses from the actuators, friction losses in transmission, and the interaction losses caused by the interface between the system and the environment. Four design principles that minimize these losses are discussed: employment of high torque-density motors, energy regenerative electronic system, low loss transmission, and a low leg inertia. These principles were implemented in the design of the MIT Cheetah; the major design features are large gap diameter motors, regenerative electric motor drivers, single-stage low gear transmission, dual coaxial motors with composite legs, and the differential actuated spine. The experimental results of fast trotting are presented; the 33-kg robot runs at 22 km/h (6 m/s). The total power consumption from the battery pack was 973 W and resulted in a total cost of transport of 0.5, which rivals running animals' at the same scale. 76% of the total energy consumption is attributed to heat loss from the motor, and the remaining 24% is used in mechanical work, which is dissipated as interaction loss as well as friction losses at the joint and transmission.
科研通智能强力驱动
Strongly Powered by AbleSci AI