Effects of processing parameters on the performance of carbon fiber reinforced polyphenylene sulfide laminates manufactured by laser-assisted automated fiber placement

In situ consolidation of thermoplastic composites can be realized through laser-assisted automated fiber placement (AFP) technology, and the properties of composites were significant affected by the process parameters. In this work, the effects of process parameters on the properties of continuous carbon fiber–reinforced polyphenylene sulfide (CF/PPS) composites manufactured by laser-assisted AFP were investigated. Four-plies CF/PPS prepreg was laid under the combination of different process parameters and the morphology, void content, crystallinity, and inter-laminar shear strength (ILSS) of the composites were characterized. It turned out that the resin distribution on the surface of the composites could be significantly improved by increasing the laser temperature and compaction pressure. The highest crystallinity of the composites reached 46% at tool temperature of 120°C while the value was only 18% when the tool temperature was 40°C. Meanwhile, with the increasing compaction force ranging of 500–2000 N, the void content of the composites decreased obviously. The ILSS was evaluated through double notch tensile shear test. The results indicated that the mechanical properties of the composites were dominated by void content rather than crystallinity.