Liver fibrosis staging using supersonic shear imaging : a clinical study on 142 patients

I. Background, Motivation and ObjectiveFibrosis staging can be assessed by a rough estimation of the liver stiffness averaged along an ultrasonic A-line. Providing a complete 2D map of liver stiffness would thus be of great clinical interest for the diagnosis of hepatic fibrosis and help prevent upcoming cirrhosis. However, such measurement requires both a quantitative value of shear elasticity and a great precision to discriminate between different fibrosis levels. Beyond the scope of non-invasive fibrosis quantification, it is also envisioned that quantitative elasticity imaging of liver will have potential interest for liver cancer diagnosis. In this work, the Supersonic Shear Imaging technique (SSI) is proposed to map the in vivo viscoelastic parameters of liver on patients with hepatitis C and derive a mean elasticity of liver tissues. The results are compared to biological tests (Fib4, Apri, Forns) and Fibroscan® measurements. II. Statement of Contribution / MethodsThe SSI technique is based on the radiation force induced by a conventional ultrasonic probe to generate a planar shear wave deep into tissues. The shear wave propagation throughout the medium is caught in real time thanks to an ultrafast ultrasound scanner (up to 5000 frames/s). Using modified sequences and post-processing, this technique is implemented on curved arrays in order to get a larger field of view of liver tissues. A study on 150 HCV patients with different fibrosis stages F has been conducted in order to investigate the accuracy of the technique (F ϵ [0;4]). Quantitative maps of liver elasticity are produced for each volunteer with a linear and a curved array. III. ResultsB-mode images of 120x75 mm² and corresponding elasticity maps are obtained using a 2.5 MHz curved ultrasonic probe with a good reproducibility and accuracy. The shear wave phase velocity dispersion is also calculated. This study shows a good correlation between the values obtained by SSI and the fibrosis levels diagnosed by biological tests (p-index < 10-8) and allows a good differentiation of fibrosis level F (Youden's index Y> 0.9 for F>3 and Y> 0.8 for F>2). Results are also compared (r2 > 0.92) to the Fibroscan® elasticity measurement by fitting the velocity dispersion curves obtained by SSI at 50 Hz.IV. Discussion and ConclusionsThis real-time elasticity mapping using an ultrasonic curved probe offers better signal to noise ratio than linear arrays and a larger area in the patient's liver (13.3±2.8 cm² estimation area). This gives more confidence on the accuracy of the diagnosis of the fibrosis stage. Furthermore, the elasticity parameters obtained with SSI give access to the shear wave group velocity and the phase velocity. As a consequence, the SSI assessment of liver stiffness could potentially give more information on the viscoelasticity properties of the liver.