材料科学
兴奋剂
共发射极
接触面积
铝
太阳能电池
光电子学
复合材料
分析化学(期刊)
色谱法
化学
作者
Byungsul Min,M. Müller,Bettina Wolpensinger,Gerd Fischer,Phedon Palinginis,Dirk Holger Neuhaus,Rolf Brendel
标识
DOI:10.1109/jphotov.2021.3068603
摘要
This article investigates the impact of the back-surface-field (BSF) thickness variation within a local aluminum contact on the performance of passivated emitter and rear contact solar cells. A significant difference of BSF thickness between contact endings and the center of dash-shaped contacts is verified experimentally by a comprehensive statistical analysis using scanning electron microscopy. The impact of local BSF thickness differences on the cell performance is studied with 3-D technology computer-aided design (TCAD) device simulations. Several device parameters such as BSF thicknesses, the doping concentration in the BSF profile at rear contacts, or the metallized area fraction at the cell rear side are varied. Our simulation study shows that the open-circuit voltage is mainly affected by locally reduced BSF thicknesses, resulting in an efficiency loss up to 0.14% abs or 0.84% abs , respectively, if an area fraction of 1% or 20% within a local contact has reduced BSF thicknesses. This effect can be minimized either by reducing the metallized area fraction at the cell rear side or by increasing the doping concentration in the BSF profile at aluminum rear contacts. In addition, we demonstrate that the 3-D simulations can be approximated with 2-D simulations by applying a single doping profile with an average BSF thickness, calculated with the harmonic mean.
科研通智能强力驱动
Strongly Powered by AbleSci AI