Trace-metal-assisted flash synthesis for fast-charging graphite anodes
作者
H. Zhu,Yi Cheng,Shichen Xu,Shihui Chen,Vladimir Mancevski,Haoxin Leo Ye,Justin Sharp,Ralph S. Abdel Nour,Qiming Liu,Boris I. Yakobson,Yufeng Zhao,James M. Tour
Graphite has remained the dominant anode material in lithium-ion batteries (LIBs), powering portable electronics and electric vehicles (EVs). However, sluggish Li+ diffusion kinetics in natural and synthetic graphite can severely limit charging rates. Overcoming this bottleneck requires the rational design of graphite architectures that enable rapid Li+ transport in LIBs. Here, we disclose a trace-metal-assisted flash (TMF) process for the millisecond synthesis of catalytic flashed graphite (CFGr) with exceptionally fast-charging capabilities. The TMF process induces in situ formation of trace nickel nanoclusters that catalyze ultrafast graphitization of amorphous carbon into highly ordered graphite within <1 s. Raman spectroscopy shows an exceedingly clean graphite material with ID/IG of 0.09, with calculations yielding a binding energy (Eb) of −2.297 eV, while diffraction reveals a sub-angstrom-level interlayer expansion (d002) of 3.4 Å. These afford an enhanced structural stability and Li+ accessibility. Consequently, optimized CFGr achieves a high reversible capacity of 347.4 mAh g−1 at 0.25 C and retains 158.8 mAh g−1 at 15 C with 80% capacity retention after 1000 cycles, outperforming the rate and cyclability of both commercial graphite and graphite prepared by flash Joule heating. The TMF route can replace conventional energy-intensive calcination, reducing energy use and emissions by over 80% and lowering the production cost of premium fast-charging synthetic graphite by ~80% to only US$0.84 kg−1. These findings establish a sustainable, scalable pathway to advance fast-charging graphite anodes into next-generation LIBs.