摘要
We demonstrate the use of inverse design to achieve high-efficiency, compact$90^{\circ }$bends with radii as small as$6 \,{\mu }\mathrm{m}$with silicon nitride waveguides. These bends are designed for the TE polarization of single-mode waveguides with a cross-section of$850 \,{\mathrm{nm}}$×$400 \,{\mathrm{nm}}$, optimized for the C-band. Both simulations and experimental results confirm that the freeform bends obtained through inverse design outperform conventional circular and Euler bends across four footprint sizes ranging from$6$×$6 \,{\mu }\mathrm{m}^{2}$to$21$×$21 \,{{\mu }\mathrm{m}}^{2}$. All inverse-designed bends were fabricated using an e-beam lithography process and designed with a minimum feature size of 160 nm, ensuring maximum compatibility with commercial optical lithography processes and viability for large-scale production. Simulations for the$6 \,{\mu }\mathrm{m}$radius bends show that the best freeform bend exhibits an average loss of$1.62 \,{\mathrm{dB}}$across the entire C-band, compared to$2.88 \,{\mathrm{dB}}$for circular bends and$3.46 \,{\mathrm{dB}}$for Euler bends. Experimental results align well with simulations, with measured losses of$1.89 \,{\mathrm{dB}}$,$2.86 \,{\mathrm{dB}}$, and$3.44 \,{\mathrm{dB}}$for the freeform, circular, and Euler bends, respectively. For the$11 \,{\mu }\mathrm{m}$bending radius, one of the freeform structures demonstrated low losses of$0.18 \,{\mathrm{dB}}$, representing reductions by factors of up to$6.6$and$1.8$times compared to Euler and circular bends, respectively. For the$16 \,{\mu }\mathrm{m}$and$21 \,{\mu }\mathrm{m}$radii, the best freeform bends achieved average losses of$0.08 \,{\mathrm{dB}}$and$0.11 \,{\mathrm{dB}}$per$90^{\circ }$bend across the$1530 \,{\mathrm{nm}}$to$1565 \,{\mathrm{nm}}$wavelength range. These results highlight the potential of inverse design to enable significantly more compact routing in silicon nitride photonic chips, facilitating the development of high-density photonic circuits.