可加工性
合金
机械加工
亚稳态
材料科学
冶金
钛合金
刀具磨损
物理
量子力学
作者
Muhammad Adeel Zafar,Chi‐Ho Ng,Mandeep Singh,Matthew Simon Dargusch,Michael J. Bermingham
标识
DOI:10.1016/j.triboint.2025.111033
摘要
Additively Manufactured (AM) metastable β-Ti alloys are strong candidates for aerospace and biomedical applications due to their potential for exceptional strength through precipitation hardening. However, post-AM heat-treatments and machining operations are typically required to achieve the desired properties and design tolerances, necessitating careful sequencing considerations of these processes. This study investigates the machinability of Ti-3Al-8V-6Cr-4Mo-4Zr (Beta-C) produced by Wire Arc Additive Manufacturing (WAAM) under Solution-Treated (ST) and Solution-Treated and Aged (STA) conditions. Results show that ageing significantly impairs machinability, increasing cutting forces by over 20 %, accelerating tool wear, and degrading surface finish. Elevated cutting temperatures cause cobalt binder depletion and rapid tool deterioration. Tool life is halved after ageing, emphasizing the need to optimize heat-treatment and machining sequences when manufacturing components.
科研通智能强力驱动
Strongly Powered by AbleSci AI