材料科学
陶瓷
微波食品加热
极高频率
电介质
温度系数
插入损耗
相对介电常数
波导管
介电损耗
光电子学
介电常数
分析化学(期刊)
电信
光学
复合材料
计算机科学
化学
物理
色谱法
作者
Huan Liu,Yu Liu,Xueqing Yu,Minmin Mao,Bing Liu,Hadi Barzegar Bafrooei,Aihua Li,Yuanyuan Zhang,Ehsan Taheri‐Nassaj,Kaixin Song,Wenjun Li,Ian Michael Reaney
标识
DOI:10.1016/j.jeurceramsoc.2023.07.073
摘要
New ultra-low loss, temperature-stable composite ceramics, (1-x) Mg1.99Ga0.01Si0.99Al0.01O4-xCaTiO3, have been developed with a view to expanding the portfolio of low-cost, MW dielectrics available for 5 G/6 G telecommunications, currently dominated by 95 wt%MgTiO3-5 wt%CaTiO3, (Mg,Ca)TiO3 (relative permittivity, εr ∼ 21, quality factor, Q×f ∼ 56,000 GHz and temperature coefficient of resonant frequency, τf ∼ 0 ppm/°C). Compared with (Mg,Ca)TiO3, 89 wt%Mg1.99Ga0.01Si0.99Al0.01O4-11 wt%CaTiO3 ceramics are also temperature stable (τf = −2.72 ppm/°C) but have lower εr (∼8.55) and a higher Q×f (∼ 72,900 GHz @ 12 GHz and 80,900 GHz @ 26 GHz), better suited to the higher frequencies earmarked for 6 G millimeter-wave (mm-wave) applications. To demonstrate its potential for 5 G/6 G telecommunications, a waveguide filter with novel negative coupling structure was fabricated based on simulated results. The filter had low insertion loss (0.43 dB) at the center frequency (4.8 GHz) and high selectivity with a roll-off rate of 576/375 dB/GHz. The S-parameters matched well at 25 °C and 85 °C, demonstrating that the filter had excellent temperature stability and was therefore suitable for future 5 G/6 G microwave and mm-wave communication devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI