Studying the effect of different pore‐formers on characteristics and separation performance of PCTFE MF membrane

材料科学 膜 复合材料 化学工程 化学 工程类 生物化学
作者
Hamideh Yari,Majid Pakizeh,Ali Dashti,Mahdi Pourafshari Chenar
出处
期刊:Polymer Engineering and Science [Wiley]
卷期号:64 (11): 5520-5538 被引量:3
标识
DOI:10.1002/pen.26931
摘要

Abstract When fabricating polymeric membranes using the non‐solvent induced phase separation (NIPS) technique, the characteristics and performance of the resulting membranes are significantly influenced by the additives incorporated into the casting solution. In this study, polychlorotrifluoroethylene (PCTFE) microfiltration (MF) membranes were fabricated using different pore‐formers including organic solvents, inorganic salts, and polymers. PCTFE was used as an attractive polymer for the first time in the liquid filtration process. This is due to its favorable properties for MF membranes such as ease of processing, high mechanical robustness, and fouling‐resistance. Dimethylformamide (DMF), ethanol, NaCl, ammonium bicarbonate, and polyethylene glycol (PEG) were incorporated at 1–4 wt% concentration as pore‐forming agents into the PCTFE solution. The prepared membranes were characterized by scanning electron microscopy (SEM), water contact angle measurement, and their filtration performance was assessed by pure water permeability (PWP) measurement and separation of milk fat in a cross‐flow membrane module. From the results, the overall porosity, surface porosity, mean pore size, hydrophilicity, PWP, steady flux, and fat rejection were in the following order for the modified membranes: PCTFE/DMF > PCTFE/PEG > PCTFE/ethanol > PCTFE/ammonium bicarbonate > PCTFE/NaCl. Among modified membranes, the highest fat rejection (95.8%) was obtained for the 1 wt% DMF‐containing casting solution. The fat rejection of this membrane was slightly less than the neat PCTFE membrane (97.5%), but its steady permeate flux was more than twice that of the pure sample. Additionally, the anti‐fouling and mechanical characteristics of the membranes were also investigated to assess the suitability of PCTFE polymers for the MF process. Highlights MF process was conducted using novel PCTFE flat‐sheet membranes. The PCTFE membrane was prepared with different pore‐formers. Using different concentrations of pore‐formers affected the membrane structure. Using pore‐formers affected the PCTFE membrane performance.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
晴天发布了新的文献求助10
1秒前
幽默的尔蓝完成签到,获得积分10
1秒前
乎乎完成签到,获得积分10
2秒前
一一完成签到,获得积分10
2秒前
万能图书馆的应助被杰杰小杰采纳,获得10
2秒前
善良梦竹完成签到 ,获得积分10
3秒前
碧蓝可乐完成签到,获得积分10
3秒前
HZH完成签到 ,获得积分10
3秒前
369ninja发布了新的文献求助10
4秒前
qdstisti完成签到,获得积分10
4秒前
再见了星空完成签到,获得积分0
4秒前
活泼红牛完成签到,获得积分10
5秒前
喜悦白玉完成签到,获得积分10
5秒前
小小鱼儿完成签到,获得积分10
5秒前
清爽的灵竹完成签到,获得积分10
5秒前
小J完成签到,获得积分10
5秒前
可爱可愁完成签到,获得积分10
6秒前
白枫完成签到 ,获得积分10
6秒前
6秒前
yuuu完成签到 ,获得积分10
6秒前
兔子爱吃胡萝卜完成签到,获得积分10
6秒前
chujiu完成签到 ,获得积分10
6秒前
7秒前
枕月听松完成签到,获得积分10
7秒前
7秒前
8秒前
笑嘻嘻完成签到,获得积分10
8秒前
冷酷的天宇完成签到,获得积分10
8秒前
weizhi完成签到,获得积分10
9秒前
今后的应助被晴天采纳,获得10
9秒前
无花果的应助被Crazy_Runner采纳,获得10
9秒前
舒心易烟完成签到,获得积分10
9秒前
jessie完成签到,获得积分10
10秒前
专业论文的应助被伍安采纳,获得10
11秒前
GLORIA的应助被伍安采纳,获得10
11秒前
11秒前
红鱼完成签到,获得积分10
11秒前
长乐发布了新的文献求助10
11秒前
斯文的捕完成签到 ,获得积分10
11秒前
Davey1220完成签到,获得积分10
12秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180135
求助须知:如何正确求助?哪些是违规求助? 9570290
关于积分的说明 21809391
捐赠科研通 7776237
什么是DOI,文献DOI怎么找? 3433266
关于科研通互助平台的介绍 2557465
邀请新用户注册赠送积分活动 2479039