Simultaneous generation of electricity, ethylene and decomposition of nitrous oxide via protonic ceramic fuel cell membrane reactor

Nonoxidative dehydrogenation of ethane and nitrous oxide decomposition were coupled in a protonic ceramic fuel cell membrane reactor to achieve simultaneous generation of electricity, ethylene and decomposition of nitrous oxide. • Pr 0.6 Sr 0.4 Fe 0.8 Nb 0.1 Cu 0.1 O 3−δ was developed with high reduction tolerance and abundant oxygen vacancies. • Pr 0.6 Sr 0.4 Fe 0.8 Nb 0.1 Cu 0.1 O 3−δ exhibits excellent catalytic activity towards the NDE reaction for ethylene production. • Simultaneous generation of electricity, ethylene and decomposition of nitrous oxide were successfully achieved in a protonic ceramic fuel cell membrane reactor. • The maximum power density of the cell reaches 208 mW cm −2 at 750 °C, with high ethane conversion (45.2%), ethylene selectivity (92.5%), and nitrous oxide conversion (19.0%). Ethylene, one of the most widely produced building blocks in the petrochemical industry, has received intense attention. Ethylene production, using electrochemical hydrogen pump-facilitated nonoxidative dehydrogenation of ethane (NDE) to ethylene, is an emerging and promising route, promoting the transformation of the ethylene industry from energy-intensive steam cracking process to new electrochemical membrane reactor technology. In this work, the NDE reaction is incorporated into a BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3− δ electrolyte-supported protonic ceramic fuel cell membrane reactor to co-generate electricity and ethylene, utilizing the Nb and Cu doped perovskite oxide Pr 0.6 Sr 0.4 Fe 0.8 Nb 0.1 Cu 0.1 O 3− δ (PSFNCu) as anode catalytic layer. Due to the doping of Nb and Cu, PSFNCu was endowed with high reduction tolerance and rich oxygen vacancies, showing excellent NDE catalytic performance. The maximum power density of the assembled reactor reaches 200 mW cm −2 at 750 °C, with high ethane conversion (44.9%) and ethylene selectivity (92.7%). Moreover, the nitrous oxide decomposition was first coupled in the protonic ceramic fuel cell membrane reactor to consume the permeated protons. As a result, the generation of electricity, ethylene and decomposition of nitrous oxide can be simultaneously obtained by a single reactor. Specifically, the maximum power density of the cell reaches 208 mW cm −2 at 750 °C, with high ethane conversion (45.2%), ethylene selectivity (92.5%), and nitrous oxide conversion (19.0%). This multi-win technology is promising for not only the production of chemicals and energy but also greenhouse gas reduction.