Interfacial engineering to construct P-loaded hollow nanohybrids for flame-retardant and high-performance epoxy resins

Nano flame retardants, as one of the key flame retardants in recent years, have been limited by poor efficiency and weak compatibility. In this study, we propose an interfacial hollow engineering strategy to tackle this problem by assembling P-phytic acid into the hollow cavity of mesoporous SiO2 grafted with a polydopamine transition metal. In this design, the grafted polydopamine-metal coatings on the hybrids can greatly improve their interface compatibility with the polymer matrix, while the loaded phytic acid in the cavity contributes to enhance flame retardancy. Consequently, the resultant hierarchical P-loaded nanohybrids show both high flame retardancy and mechanical reinforcement for the polymer. Taking epoxy resin (EP, a typical thermosetting resin used in large quantities) as a representative, at only 1 wt% loading of the nanohybrids, the impact strength of the nanocomposites improved by 35.7% compared to pure EP. Remarkably, the hybrids can simultaneously endow EP with high flame retardancy (low heat release rate) and satisfactory smoke inhibition. Additionally, the flame-retardant mechanism analysis confirmed that the nanohybrid had a better catalytic carbonization effect on promoting the highly graphitized carbon layer, thereby suppressing the fire hazard of epoxy resins. This research offers a new interfacial hollow engineering method for the construct and design of high-performance EP with nanohybrids.