材料科学
烧结
电解质
离子电导率
电导率
化学工程
氧化物
电池(电)
快离子导体
热压
锂(药物)
无定形固体
锂离子电池
电极
复合材料
冶金
物理化学
结晶学
化学
功率(物理)
量子力学
内分泌学
医学
工程类
物理
作者
Junji Akimoto,Tadayoshi Akao,Kunimitsu Kataoka
出处
期刊:Small
[Wiley]
日期:2023-06-07
卷期号:19 (40): e2301617-e2301617
被引量:16
标识
DOI:10.1002/smll.202301617
摘要
Abstract Garnet‐type Li 7 La 3 Zr 2 O 12 (LLZ) materials are attracting attention as solid electrolytes (SEs) in oxide‐based all‐solid‐state batteries (ASSBs) owing to their high ionic conductivity. Although the electrochemical stability of LLZ against Li metal is demonstrated with possible high energy density, high‐temperature sintering above 1000 °C, which is required to achieve high Li‐ion conductivity, results in the formation of insulating impurities at the electrode–electrolyte interfaces. Here, nanosized fine‐particle samples of Ta‐substituted Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZT) are successfully prepared at a remarkably low temperature of 400 °C utilizing an amorphous precursor oxide. The dense LLZT SE sintered by hot pressing at 500 °C shows room‐temperature Li‐ion conductivity of 1.03 × 10 −4 S cm −1 without any additives. In addition, the bulk‐type NCM–graphite full battery cell fabricated with the LLZT fine particles through a hot‐pressing sintering method at 550 °C exhibits a good charge–discharge performance at room temperature with the bulk‐type areal discharge capacity of 0.831 mAh cm −2 . The nanosized garnet SE strategy demonstrated in this study paves the way for the formation of oxide‐based ASSBs by low‐temperature sintering.
科研通智能强力驱动
Strongly Powered by AbleSci AI