微观结构
材料科学
高速钢
石墨
碳化物
扫描电子显微镜
烧结
冶金
硅
碳化硅
碳纤维
相(物质)
液相
复合材料
复合数
化学
有机化学
物理
热力学
作者
Walid Khraisat,Wisam M. Abu Jadayil
出处
期刊:Heliyon
[Elsevier BV]
日期:2024-07-01
卷期号:10 (13): e33925-e33925
被引量:6
标识
DOI:10.1016/j.heliyon.2024.e33925
摘要
The microstructure of liquid phase sintered M3:2 high speed steel and the effect of adding carbon and silicon on the microstructure was characterized by scanning electron microscopy, dispersive spectrometry, and X-ray diffraction. Various types of carbides were formed depending on the added carbon and/or silicon, the sintering atmosphere and the cooling rate. The microstructure of sintered M3:2 high speed steel samples in vacuum conditions without the addition of Si and graphite is composed mainly of MC and M 6 C carbides inside cells and primarily at cell boundaries. The M 2 C eutectic carbides in these samples were formed at cell boundaries and their amounts and morphology depends on the cooling rate. Sintered samples in N 2 atmosphere with added carbon and silicon, M 6 C eutectic and M 7 C 3 eutectic carbides were dominantly formed while carbonitrides were formed in smaller amounts.
科研通智能强力驱动
Strongly Powered by AbleSci AI