材料科学
复合材料
转移模塑
热塑性塑料
聚酰胺
差示扫描量热法
固化(化学)
复合数
造型(装饰)
极限抗拉强度
玻璃纤维
热力学
物理
模具
作者
Jung Woo Lee,Jun Woo Lim,Minkook Kim
摘要
Abstract The thermoplastic resin transfer molding (T‐RTM) process for carbon fiber reinforced thermoplastic polymer composites (CFRTP) were experimentally investigated and optimized using high‐pressure resin transfer molding system for mass production. The CFRTP was manufactured by Anionic ring opening polymerization of the T‐RTM process and the curing process was analyzed by in situ cure monitoring using dielectrometry. Mechanical properties, productivity, and crystal structures of the PA 6 matrix and CFRTP were evaluated by differential scanning calorimetry, X‐ray diffraction analysis, tensile, and interlaminar shear strength tests. The crystallinity, impregnation quality and process speed were determined by the curing temperature. In addition, a time‐ and cost‐effective flame surface treatment was developed to remove moisture from the carbon fiber and increase the interfacial bonding strength of the CFRTP. As a result, optimal T‐RTM processing conditions were suggested for realizing maximum productivity and mechanical properties for the CFRTP.
科研通智能强力驱动
Strongly Powered by AbleSci AI