锂(药物)
锰
阴极
材料科学
离子
过渡金属
相(物质)
相变
化学工程
氧化物
容量损失
氧化锰
电极
冶金
化学
电化学
催化作用
物理化学
热力学
物理
工程类
内分泌学
医学
有机化学
生物化学
作者
Bei Hu,Xiaobing Lou,Chao Li,Fushan Geng,Mengchu Yang,Ming Shen,Bingwen Hu
标识
DOI:10.1002/celc.201801739
摘要
Abstract Li‐rich layered oxides with superior energy density have become appealing alternative cathode materials for next‐generation lithium‐ion batteries. However, they still suffer from voltage decay and irreversible capacity loss due to an undesirable phase transition. Normally, the phase transition is caused by the reduction of Mn ions and migration of the transition metals. In order to address this issue, we herein report a facile and efficient strategy to fabricate a well‐structured Li‐rich layered Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 by an optimized sol‐gel method. Experimentally we find that the as‐synthesized layered oxide delivers a high initial discharge capacity as high as 279 mAh g −1 at 0.1 C and remains a capacity of 250 mA g −1 after 100 cycles when used as a cathode for lithium‐ion batteries. Mn L‐edge and O K‐edge soft X‐ray absorption spectra reveal that the reduction of Mn ions and the migration of transition metals have been well mitigated.
科研通智能强力驱动
Strongly Powered by AbleSci AI