材料科学
镁合金
表面粗糙度
GSM演进的增强数据速率
立铣刀
人工神经网络
机械加工
表面光洁度
镁
感知器
机械工程
冶金
工程制图
复合材料
计算机科学
工程类
人工智能
作者
Ireneusz Zagórski,Anna Szczepaniak,Monika Kulisz,Jarosław Korpysa
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2022-04-28
卷期号:15 (9): 3184-3184
被引量:13
摘要
This paper shows the surface quality results after finishing milling of AZ91D and AZ31 magnesium alloys. The study was performed for variable technological parameters: cutting speed, feed per tooth, axial depth of cut and radial depth of cut. The tools used in the study were two carbide cutters with a different tool cutting edge helix angle. The measurement of the research results presented the surface roughness parameters was made on the lateral faces and the end faces of the specimens. Statistical analysis and simulations using artificial neural networks were carried out with the Statistica software. The normality of the distribution was examined, and the hypotheses of the equality of mean values and variance were verified. For the AZ91D magnesium alloy on the lateral and the end faces (Ra, Rz parameters), simulations were carried out. Two types of ANN were used: MLP (Multi-layered perceptron) and RBF (Radial Basis Function). To increase the machining stability and to obtain a high surface finish, the more suitable tool for finishing milling is the tool with a helix angle of λs = 20°. Artificial neural networks have been shown to be a good tool for predicting surface roughness parameters of magnesium alloys after finishing milling.
科研通智能强力驱动
Strongly Powered by AbleSci AI