材料科学
磁流变液
剪应力
剪切模量
剪切(地质)
复合材料
阻力
光学
剪切速率
模数
压力(语言学)
粘度
机械
磁场
物理
哲学
量子力学
语言学
作者
Chunlin Miao,Shai N. Shafrir,John C. Lambropoulos,Joni Mici,Stephen D. Jacobs
出处
期刊:Applied optics-OT
[Optica Publishing Group]
日期:2009-04-29
卷期号:48 (13): 2585-2585
被引量:120
摘要
We report in situ, simultaneous measurements of both drag and normal forces in magnetorheological finishing (MRF) for what is believed to be the first time, using a spot taking machine (STM) as a test bed to take MRF spots on stationary parts. The measurements are carried out over the entire area where material is being removed, i.e., the projected area of the MRF removal function/spot on the part surface, using a dual force sensor. This approach experimentally addresses the mechanisms governing material removal in MRF for optical glasses in terms of the hydrodynamic pressure and shear stress, applied by the hydrodynamic flow of magnetorheological fluid at the gap between the part surface and the STM wheel. This work demonstrates that the volumetric removal rate shows a positive linear dependence on shear stress. Shear stress exhibits a positive linear dependence on a material figure of merit that depends upon Young's modulus, fracture toughness, and hardness. A modified Preston's equation is proposed that better estimates MRF material removal rate for optical glasses by incorporating mechanical properties, shear stress, and velocity.
科研通智能强力驱动
Strongly Powered by AbleSci AI