聚二甲基硅氧烷
材料科学
碳纳米管
电极
导电聚合物
复合数
超声
聚合物
制作
复合材料
导电体
纳米技术
化学工程
化学
物理化学
替代医学
病理
工程类
医学
作者
Benyan Liu,Yingmin Chen,Zhangyuan Luo,Wenzan Zhang,Quan Tu,Xun Jin
标识
DOI:10.1080/09205063.2015.1082807
摘要
Polymer-based flexible electrodes are receiving much attention in medical applications due to their good wearing comfort. The current fabrication methods of such electrodes are not widely applied. In this study, polydimethylsiloxane (PDMS) and conductive additives of carbon nanotubes (CNTs) were employed to fabricate composite electrodes for electrocardiography (ECG). A three-step dispersion process consisting of ultrasonication, stirring, and in situ polymerization was developed to yield homogenous CNTs-PDMS mixtures. The CNTs-PDMS mixtures were used to fabricate CNTs-PDMS composite electrodes by replica technology. The influence of ultrasonication time and CNT concentration on polymer electrode performance was evaluated by impedance and ECG measurements. The signal amplitude of the electrodes prepared using an ultrasonication time of 12 h and CNT content of 5 wt% was comparable to that of commercial Ag/AgCl electrodes. The polymer electrodes were easily fabricated by conventional manufacturing techniques, indicating a potential advantage of reduced cost for mass production.
科研通智能强力驱动
Strongly Powered by AbleSci AI