材料科学
路基
复合材料
机制(生物学)
岩土工程
失效机理
材料性能
冶金
土壤水分
材料加工
填料(材料)
作者
Jieya Zhang,Xian Dong,Zhen Yang,Chongxian Suo
标识
DOI:10.1080/10298436.2026.2625862
摘要
This study investigates performance variations of solidified soil filler with different compaction degrees after varying numbers of dry‒wet cycles. The tested properties include the unconfined compressive strength (UCS), California bearing ratio (CBR), resilient modulus, compressive modulus and dynamic characteristics. The influence of dry‒wet cycles on the dynamic characteristics of solidified soil is revealed via backbone curve evolution and dynamic strain trends in dynamic triaxial multistage loading tests. Finally, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) characterize microstructural impacts of dry‒wet cycles on specimens. Results show that the UCS, CBR, resilient modulus and compressive modulus of the specimens increased initially, peaked at approximately 10 dry‒wet cycles, then decreased gradually. Similarly, dynamic strength from dynamic triaxial tests increased before 10 dry‒wet cycles but declined gradually with further cycling. XRD and SEM results indicate that early dry‒wet cycles boost hydration product formation and structural densification, raising macroscopic strength; sustained cycling dissolves partial hydration products, causing loosening and strength loss. NMR analysis shows lower compaction and more dry‒wet cycles significantly affect large pores. Increased large-pore porosity and reduced pore fractal dimension both degrade mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI