阴极
材料科学
电化学
氨
化学工程
粒径
粒子(生态学)
电极
微观结构
小学(天文学)
扩散
电化学动力学
耐久性
粒度分布
阳极
动力学
无机化学
纳米技术
氧化还原
作者
Khaja Hussain Shaik,Hyeon Jun Choi,Junsu Kim
出处
期刊:Batteries
[Multidisciplinary Digital Publishing Institute]
日期:2025-12-27
卷期号:12 (1): 13-13
标识
DOI:10.3390/batteries12010013
摘要
Ni-rich layered LiNi0.6Co0.2Mn0.2O2 (NCM622) cathodes are the most promising candidates for high-energy lithium-ion batteries, but their performance is often limited by structural instability and capacity fading due to large primary particle sizes and surface degradation. Precise control of the primary particle size significantly impacts the performance of NCM622 cathodes and can mitigate fatigue mechanisms, but the underlying processes remain unclear. In this study, NCM622 cathodes with various primary particle sizes were synthesized by applying a controlled co-precipitation strategy by systematically controlling the ammonia feed rate and solution pH during precursor formation. Interestingly, higher ammonia feed rates promoted the formation of smaller, more ordered primary particles, whereas lower feed rates and reduced pH produced larger primary particles in spherical secondary structures. Electrochemical evaluation revealed that cathodes composed of smaller primary particles exhibited enhanced Li+ diffusion kinetics and superior electrochemical performance compared to those synthesized under lower ammonia feeding or reduced pH conditions. Moreover, the optimized NCM622 electrode demonstrated excellent rate capability and maintained a stable layered microstructure during cycling, retaining ~86% of its initial capacity. These results demonstrate that fine-tuning the ammonia feeding conditions during co-precipitation provides a simple and effective approach to control primary particle growth, thereby improving the structural integrity and electrochemical durability of NCM622 cathode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI