Rotor bearings in inverter driven electric drive systems are affected by parasitic electrical voltages. These voltages can lead to harmful discharge currents that can damage the bearing components. The bearing capacitance is an important property to predict the electrical load on the bearing. It is often approximated using empirical determined correction factors. They are well suited for a fast analytical approximation of the bearing capacitance but are based on the contact capacitance. They do not account for the environment of the contact or the influence of surrounding components on the bearing capacitance. In this study a simulation method is used to determine the capacitance of deep groove ball bearings including these effects. It combines an electrically extended EHL-simulation with an electrostatic FE-simulation of the surroundings. The simulation results show good agreement with measurement results for pure axial load, pure radial load and combination of both.