材料科学
化学
化学工程
锌
挥发性有机化合物
有机化合物
纳米颗粒
纳米技术
热解
沉积(地质)
作者
Ting Chen,Tao Zhu,Xiaojun Zhang,Chengbiao Dong,C Zhang,Zhixiang Xie,Xinxin Xing,Yude Wang
标识
DOI:10.1021/acsanm.6c00794
摘要
ZnO, a widely studied metal oxide semiconductor, often suffers from low sensitivity and poor selectivity when used as a gas-sensing material. Herein, we report the rational design of Al-doped ZnO (AZO) nanoflakes with a hierarchical nanostructure assembled from interconnected nanorods via a nonhydrolytic sol–gel (NHSG) route. This nanoscale architecture provides a high specific surface area and abundant mesopores, enabling efficient gas diffusion and an increase in active sites for surface reactions. Meanwhile, homogeneous Al incorporation at the atomic level modulates the electronic structure and promotes the formation of oxygen vacancies, thereby enhancing the surface reactivity and charge-transfer kinetics. The 3 at. % AZO nanoflake exhibited optimal acetone-sensing performance, achieving a high response (Ra/Rg) of 198 toward 500 ppm acetone at 340 °C, which is 3.1 times higher than that of pure ZnO. The optimal operating temperature was notably reduced from 400 °C (pure ZnO) to 340 °C. Moreover, the sensor demonstrated excellent selectivity toward acetone against interfering gases such as formaldehyde, methanol, and toluene, along with remarkable long-term stability over 30 days and a reproducible dynamic response–recovery behavior. This work provides a simple and effective strategy for developing high-performance AZO-based gas sensors for acetone detection, showcasing their potential for industrial safety monitoring and indoor air-quality control.
科研通智能强力驱动
Strongly Powered by AbleSci AI