阳离子聚合
材料科学
软化点
聚氨酯
沥青
傅里叶变换红外光谱
复合材料
化学工程
高分子化学
工程类
作者
Jian Tan,Shuguang Hou,Rui Min Jin,Xiao Ping Zhong,Xiaoxi Zou
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2025-07-11
卷期号:18 (14): 3280-3280
被引量:4
摘要
To elucidate the modification mechanism of waterborne polyurethane (WPU) on emulsified asphalt, anionic and cationic WPUs are utilized as modifiers. As well, their effects on physical properties, microstructure, and compatibility are characterized using basic performance tests, Fourier transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM). The results show that WPU-modified emulsified asphalt exhibited a higher softening point, reduced penetration, and decreased ductility, suggesting enhanced high-temperature stability but diminished low-temperature flexibility. Among all samples, the combination of cationic WPU with cationic emulsified asphalt shows the highest softening point (54.1 °C), whereas cationic emulsified asphalt alone exhibits the lowest one (52.9 °C). Anionic emulsified asphalt demonstrates the highest penetration (79 mm), while non-ionic WPU combined with cationic emulsified asphalt shows the lowest one (59.3 mm). The ductility decreases from 90.3 cm to 28.7 cm. The storage stability varies with WPU ion type. Cationic WPU-modified samples showed the poorest storage stability (0.7% residue), while anionic-modified samples exhibit the best one (0.4% residue). FTIR analysis confirms the presence of characteristic WPU absorption peaks, indicating that physical blending occurs, and chemical interaction is limited. AFM observations reveal that anionic WPUs provide superior compatibility, forming fine, uniformly distributed particles with the lowest surface roughness (5.655 nm). In contrast, cationic WPUs form chain-like structures that cure effectively but exhibit poor dispersion. This study provides a basis for the development of high-performance WPU-modified emulsified asphalt.
科研通智能强力驱动
Strongly Powered by AbleSci AI