A review study on methanol steam reforming catalysts: Evaluation of the catalytic performance, characterizations, and operational parameters

Conventional fossil-based energy sources have numerous environmental demerits; sustainable and renewable sources are attracting the undivided attention of researchers owing to their valuable physical and chemical features. Several industrial-scale technologies are employing hydrogen as a green energy source as the most preferential source. Not only is hydrogen a potent energy carrier but also it is not detrimental to the environment. Among many other hydrogen production processes, steam reforming of methanol (SRM) is deemed a practical method due to its low energy consumption. Cu, Ni, noble metals, etc., are the salient catalysts in SRM. Many researchers have conducted thorough studies incorporating improvement of the catalysts’ activity, mechanism predictions, and the impacts of operational parameters and reformers. This review concentrates on the SRM catalysts, supports, promoters, and the effect of the operational parameters on the process efficiency and H 2 production yield. In this regard, the methanol conversion, H 2 and CO selectivity, and operating parameters are notably contingent on the surface characterization and chemistry of the catalysts. Herein, Cu-, Ni-, and noble metal-based catalysts on various metal oxide supports, such as Al 2 O 3 and ZnO, are assessed meticulously in the SRM process from the standpoint of mechanism and catalyst characterization. Most of the peer-reviewed studies had encountered agglomeration, metal particle sintering at high temperatures, coke formation, and deactivation of catalysts as the prevalent barriers. Hence, the novel methods of conquering the above-mentioned obstacles are evaluated in this review. Employment of diverse synthetic methods, bimetallic catalysts, distinct catalyst promoters, and unconventional supports, such as metal–organic frameworks, carbon nanotubes, and zeolites, are the salient routes to overcome the metal dispersion and thermal stability issues. In addition, the influence of operational parameters (temperature of the process, steam/carbon ratio, and feed flow rate) has been weighed painstakingly, along with introducing the research gap and future perspectives in the territory of SRM catalysts.