工程类
计算机科学
航空学
汽车工程
实时计算
模拟
作者
Hai Zhu,Baoquan Li,Haolin Yin,Xuebo Zhang
出处
期刊:IEEE Transactions on Vehicular Technology
[Institute of Electrical and Electronics Engineers]
日期:2025-04-10
卷期号:74 (9): 13658-13666
标识
DOI:10.1109/tvt.2025.3559734
摘要
Generating an executable reference trajectory in realtime is a core of autonomous navigation for a quadrotor unmanned aerial vehicle (UAV). In the paper, a timeadjusted optimization method is proposed for UAV motion planning to achieve safe and fast flight. Firstly, based on parameterization for uniform B-spline trajectories, relationship of knot spans and UAV speeds is analyzed, and an iterative velocity restrict algorithm is introduced to tackle nonexecutable flight. Subsequently, combining start and target points in local planning, an evaluation criterion function is designed with control points of the above trajectory and directions of collision avoidance. On this basis, risk assessment is conducted according to surrounding environments, where four phases of passing obstacles is constructed by considering risk level variation. Then, the weight function in each phase is determined by relationship of obstacle and planned local trajectory. Moreover, time intervals of B-spline trajectories are adjusted to obtain nonuniform trajectories, so as to affect UAV speeds. Simulation and experiment are conducted with comparison to verify performance of the proposed method.
科研通智能强力驱动
Strongly Powered by AbleSci AI