Mechanical properties of aeolian sand cemented via microbially induced calcite precipitation (MICP)

The cementation of desert aeolian sand is a key method to control land desertification and dust storms, so an economical, green and durable process to reach the binding between sand grains needs to be searched. The method based on the microbially induced calcite precipitation (MICP) appeared in recent years as a promising process that proved its efficiency. The feasibility of the MICP technique to treat aeolian sand composed by low clay content, fine particles, low water content and characterized by weak permeability was demonstrated in the present paper. The effects of initial dry density, cementation number and curing time on the permeability and strength of MICP-treated aeolian sand were investigated using permeability tests and unconfined compressive strength (UCS) tests. The microstructure of aeolian sand was observed by scanning electron microscopy (SEM) tests and X-ray diffraction (XRD), aiming to reveal the solidification principle of MICP. The tests result indicated that when the initial dry density and the cementation number rose, the hydraulic conductivity of aeolian sand decreased while the mechanical strength given by UCS values improved. When the initial dry density was 1.65 g/cm