吸热过程
惰性气体
放热反应
惰性
化学
合成气
动力学
部分氧化
化学工程
稀释剂
热分解
热化学循环
质量分数
氧化还原
无机化学
氧气
核化学
氢
物理化学
有机化学
吸附
制氢
工程类
物理
量子力学
作者
Anastasia Stamatiou,Aldo Steinfeld,Zoran R. Jovanovic
摘要
We consider the solar thermochemical production of H 2 and CO (syngas) from H 2 O and CO 2 via a two-step ZnO/Zn redox cycle. The first step, driven by concentrated solar radiation, is the endothermic thermolysis of ZnO producing a gaseous mixture of O 2 and Zn-vapor, which upon quenching precipitates a solid residue comprising Zn and ZnO in variable ratios. The second, nonsolar step is the exothermic oxidation of Zn by H 2 O and/or CO 2 to form fuel (H 2 and/or CO) and the solid product ZnO which is recycled to the solar reactor. It has been recognized that the presence of inert ZnO during the second step affects both the oxidation kinetics and the final asymptotic conversion of Zn. However, while the fraction of ZnO in a mixture with Zn leaving the thermolysis step generally varies with a solar reactor/quencher design and experimental conditions, all previously reported analyses have studied the oxidation kinetics of either pure Zn or of Zn particles blended with ZnO in a specific, preset mass ratio. This work examines the effect of dilution with inert particles on the Zn oxidation by CO 2 . Blends of commercially available Zn with ZnO or Al 2 O 3 particles have been tested by thermogravimetry. The setup was carefully designed to ensure the absence of heat and mass-transfer intrusion on the oxidation kinetics while using a 15% CO 2 –Ar mixture or pure CO 2 at 350 °C < T < 400 °C and ambient pressure. The effects of inert particle type, mass fraction, and blending method are reported and used to propose a simplified multipath reaction mechanism. The results are compared to the performance of a Zn/ZnO powder produced in a solar reactor.
科研通智能强力驱动
Strongly Powered by AbleSci AI