Expanded graphite/phenolic resin composite bipolar plates used for polymer electrolyte membrane fuel cells(PEMFC) were prepared through a compression molding process.The conductivity and flexural strength of the composite bipolar plate were measured with four-point probe method and three point bending technique respectively.The influences of resin content,molding pressure,additive content and adding manner of additive on the performance of the composite bipolar plate were investigated.The results show that resin content,molding pressure,additive content and adding manner of additive have a grate influence on the performance of the composite bipolar plate.Resin content of 20%-30% and molding pressure of 10-12 MPa are appropriate.Influences of carbon black on the properities of composite bipolar plate are complicated.In the range of carbon black used in experiment,the conductivity increases and flexural strength increases firstly and then decreases with the increase of the carbon black.When carbon black is added to resin,the properities of composite bipolar plate are better.