聚偏氟乙烯
润湿
膜
接触角
渗透
化学工程
膜蒸馏
碳化
化学
材料科学
色谱法
有机化学
海水淡化
工程类
吸附
生物化学
作者
Joanna Kujawa,Monika Zięba,Wojciech Zięba,Samer Al‐Gharabli,Wojciech Kujawski,Artur P. Terzyk
标识
DOI:10.1016/j.cej.2022.135574
摘要
The hybrid membranes based on polyvinylidene fluoride (support) and single walled carbon nanohorns SWCNH (outer layer), with the surface architecture inspired by nature, i.e. hedgehog-like and desert rose-like structures, were performed. To tune materials precisely, physicochemistry, wettability, surface charge, the SWCNH were pretreated by oxidation, ultrasonication, or both mentioned processes. The modification of membranes resulted in a significant improvement in wettability from 110° for pristine to 165.3° SWCNH-us-0.50 (reduced critical surface tension 41.08 ± 1.1 mN m−1 for pristine to 23.3 ± 1.2 mN m−1 for SWCNH-us-0.50), enhanced transport-separation properties, comparing to pristine one. The membranes with variable contact angles from 19.2° to 165.3° were produced, however, due to the unique construction, the membranes were suitable in membrane distillation implemented for the first time for hazardous volatile organic compounds (VOCs) removal from water. All membranes were selective to VOCs, i.e. ethanol and methyl acetate that was foreseen by Hansen's Solubility Parameters. The substantial improvement in membrane performance was noticed when the oxidation or the ultrasonication pretreatment of modifiers was introduced. Permeate flux increased from 3.9 for pristine membrane to 12.3 kg m-2h−1 for modified one. Simultaneously, process separation index (PSI) augmented from 3.1 to 32.2 kg m-2h−1.
科研通智能强力驱动
Strongly Powered by AbleSci AI