材料科学
小型化
临界热流密度
沉浸式(数学)
数码产品
传热系数
强化传热
电子设备和系统的热管理
功率密度
纳米线
沸点
沸腾
冷却液
传热
光电子学
纳米技术
机械工程
化学工程
热力学
电气工程
功率(物理)
物理
工程类
数学
纯数学
作者
Ya-Tzu Hsu,Jia-Xiong Li,Ming‐Chang Lu
标识
DOI:10.1016/j.applthermaleng.2017.12.067
摘要
Abstract Continual increases in the functionality and miniaturization of electronic devices have resulted in a rapid increase in the power density of such devices. Thus, an efficient cooling technology is required to maximize heat dissipation and prevent electronic failure. Immersion cooling is a promising technique for the thermal management of high-power-density electronics. However, common working fluids in immersion cooling have high global warming potential, and the heat transfer performance of immersion cooling requires improvement to achieve efficient cooling of state-of-the-art high-power-density electronics. In this study, Novec 649, which has low global warming potential and a low boiling point, was applied as a working fluid for immersion cooling. A Si nanowire (SiNW) array, Si micropillar (SiMP) array, and Si nanowires on a Si micropillar (SiNW/MP) two-tier structure were employed to enhance boiling performance. The SiMP surface exhibited the highest critical heat flux (CHF) of 23.5 ± 1.3 W/cm2, whereas the SiNW surface exhibited the lowest CHF but a relatively high heat transfer coefficient (HTC). The SiNW/MP surface exhibited the highest HTC of 23611.7 ± 1586.2 W/m2 K and a relatively large CHF of 17.4 ± 1.2 W/cm2. Compared with a plain SiO2 surface, the CHF and HTC of the SiNW/MP two-tier structure could be enhanced by 30% and 455%, respectively. These results suggest that the SiNW/MP surface is effective for enhancing immersion cooling.
科研通智能强力驱动
Strongly Powered by AbleSci AI