硼
燃烧
活化能
点火系统
扩散
氧化物
氧化硼
材料科学
分析化学(期刊)
自燃温度
热重分析
重量变化
化学工程
化学
热力学
冶金
物理化学
有机化学
医学
肥胖
物理
减肥
内科学
工程类
作者
Wen Ao,Yang Wang,Heping Li,Jun Xi,Jianzhong Liu,Junhu Zhou
标识
DOI:10.1002/prep.201300079
摘要
Abstract Only few data exist for experimental studies on ignition and combustion of boron particles with initial oxide thickness. The oxidation, ignition and combustion characteristics including the onset temperatures, weight gain, apparent activation energy, emission spectra during combustion, and ignition delay time of crystalline boron powders with different initial oxide thickness ( x 0 ) were studied by a laser ignition and thermogravimetric (TG) analyses. Simulations of the kinetics of oxide layer during boron ignition were conducted using a common model. The results indicated that the onset temperature was approximately 775 °C, independent of x 0 . The total weight gain decreased with increasing x 0, whereas the weight gain at 775 °C did not change. The apparent activation energy was found to be insensitive to x 0 and had a constant value of about 210 kJ mol −1 . The intensity of the emission spectra gradually decreased while the ignition delay time increased with increasing x 0 . Numerical simulation showed that the removal rate of oxide layer enhanced with increasing x 0 . The experimental results revealed that the oxidation of boron powder was no diffusion‐controlled process at low temperatures. But the diffusion of oxygen could become important to the oxidation reaction at high temperatures
科研通智能强力驱动
Strongly Powered by AbleSci AI