Crystallinity and Morphology in Films of Starch, Amylose and Amylopectin Blends

Films of potato starch, amylose, and amylopectin and blends thereof were prepared by solution casting and examined using X-ray diffraction, light microscopy, transmission electron microscopy, and differential scanning calorimetry. Amylose films had a relative crystallinity of about 30% whereas amylopectin films were entirely amorphous. Blending of amylose and amylopectin resulted in films with a considerably higher degree of crystallinity than could be predicted. This is explained by cocrystallization between amylose and amylopectin and possibly by crystallization of amylopectin. The crystallized material gave rise to an endotherm detected with differential scanning calorimetry. The enthalpy and peak temperature of the transition also increased as the water content decreased. When the amylose proportion in the blends was low, separate phases of amylose and amylopectin were observed by light microscopy. At higher amylose proportions, however, the phase separation was apparently prevented by amylose gelation and the formation of a continuous amylose network. The amylose network in the films, observed with transmission electron microscopy, consisted of stiff strands and open pores and became less visible as the amylose proportion decreased. The water content of the films was dependent on the microstructure and the crystallinity.