催化作用
焦炭
甲烷
工艺工程
流化床
苯
过程(计算)
化学工程
废物管理
材料科学
化学
有机化学
工程类
计算机科学
操作系统
标识
DOI:10.1016/j.crcon.2019.07.001
摘要
The Mo/HZSM-5 catalyzed, non-oxidative methane dehydroaromatization reaction provides a promising direct approach for production of benzene as well as naphthalene from CH4 resources and therefore its early industrial application is highly desired. A simplified methane dehydroaromatization process that consists of only one reactor unit and two product separation units is presented, and the factors that could significantly affect the process efficiency are quantitatively analyzed. While efficiently separating and recycling up to 70vol% unreacted CH4 from the stream out of condensable aromatics separation unit might become the main problem in maximizing the process efficiency, increasing the operating temperature as high as possible of the CH4 converter in the reactor unit and raising the system operation pressure to a level somewhat higher than one atmosphere should help maximize the process performance. At process-required high reaction temperatures, however, Mo/HZSM-5 catalyst suffers from vary rapid deactivation due to serious coke formation. Therefore, it becomes necessary to employ a reactor system that enables continuous and simultaneous regeneration of deactivated catalyst so as to maintain the catalytic activity and stability of catalyst over a sufficiently long operation period. Nineteen years of sustained R&D efforts of the author’s team have led to a few applicable technologies related to preparation of a fluidizable binder-free Mo/HZSM-5 catalyst for use in fluidized bed reactors, regeneration of deactivated Mo/HZSM-5 catalyst using H2, and design and operation of a dual-bed circulating fluidized bed reactor system for continuous processing of the Mo/HZSM-5 catalyzed methane dehydroaromatization reaction. Operated at 1073 K and under a continuous regeneration mode, an in-house developed binder-free 6%Mo/HZSM-5 catalyst has proven to be capable of providing a stable benzene yield of approximately 13% over a cumulative period of 1800 min. Nevertheless, minimizing the catalyst deactivation by coking and developing a highly effective coke-removal and catalyst regeneration approach have still remained two important issues to be addressed in realization of early application of the Mo/HZSM-5 catalyzed methane dehydroaromatization reaction. While the key to a practical solution to these challenging issues lies in designing an advanced Mo/HZSM-5 catalyst with improved coking resistance and H2-regeneration activity, effective approaches to the design of such a catalyst are presented and discussed based on four possible coke formation routes. In the end, developing a pressurized pilot-scale dual-bed type of circulating fluidized bed reactor system that is capable of providing a yearly production of benzene of approximately 35 tons and naphthalene of 5 tons is visualized to make demonstration of the industrial applicability of the Mo/HZSM-5 catalyzed methane dehydroaromatization reaction.
科研通智能强力驱动
Strongly Powered by AbleSci AI