Flexible triboelectric generator

Charges induced in triboelectric process are usually referred as a negative effect either in scientific research or technological applications, and they are wasted energy in many cases. Here, we demonstrate a simple, low cost and effective approach of using the charging process in friction to convert mechanical energy into electric power for driving small electronics. The triboelectric generator (TEG) is fabricated by stacking two polymer sheets made of materials having distinctly different triboelectric characteristics, with metal films deposited on the top and bottom of the assembled structure. Once subjected to mechanical deformation, a friction between the two films, owing to the nano-scale surface roughness, generates equal amount but opposite signs of charges at two sides. Thus, a triboelectric potential layer is formed at the interface region, which serves as a charge “pump” for driving the flow of electrons in the external load if there is a variation in the capacitance of the system. Such a flexible polymer TEG gives an output voltage of up to 3.3 V at a power density of ∼10.4 mW/cm3. TEGs have the potential of harvesting energy from human activities, rotating tires, ocean waves, mechanical vibration and more, with great applications in self-powered systems for personal electronics, environmental monitoring, medical science and even large-scale power.