Research progress on solid polymer electrolytes

Since the commercialization of lithium-ion batteries in the 1990s, lithium-ion batteries have been successfully applied in portable electronics, electric vehicles, and grid energy storage. Although current organic liquid electrolytes have high ionic conductivities, they are inherently flammable, volatile, and prone to leakage. Moreover, severe side reactions and dendrite growth on the surface of the lithium anode during the charge-discharge process can cause safety hazards, which greatly impede their applications in lithium metal batteries. Solid electrolytes, including inorganic solid electrolytes and polymer electrolytes, are regarded as effective alternatives to organic liquid electrolytes for the construction of lithium metal batteries with high energy density and safety. Among them, solid polymer electrolytes offer excellent flexibility, processability, and interfacial compatibility over inorganic solid electrolytes, and they are extraordinarily promising for lithium metal batteries with high energy density and safety. Ideal solid polymer electrolytes should have following features: (1) High ionic conductivity (> 10 ^–4 S cm ^–1) at room temperature; (2) high lithium ion transference number (~1) to reduce the concentration polarization and improve the rate performance of batteries; (3) intimate contact at the electrode/electrolyte interfaces; (4) wide electrochemical window (>4.5 V vs. Li/Li ⁺) to match high-voltage cathodes and improve the energy density of batteries; (5) good mechanical stability to resist processing, buffer electrode volume change and inhibit dendrite growth; (6) good thermal stability to withstand environmental changes. Generally, the ionic conductivity of pure solid polymer electrolytes at room temperature is low (~10 ^–6 S cm ^–1). Researchers have tried to improve the ionic conductivities by adjusting the lithium salt concentration, such as developing “polymer-in-salt” solid electrolytes. However, increasing the concentration of lithium salt leads to the deterioration of the mechanical strength. Strategies such as developing novel lithium salts, modifying polymer matrix, and incorporating inorganic fillers into solid polymer electrolytes are proposed to promote ionic conductivities of solid polymer electrolytes. In particular, composite polymer electrolytes, fabricated by dispersing a certain amount of inorganic fillers into solid polymer electrolytes, have improved ionic conductivities without sacrificing their mechanical performances. Poor interfacial property between electrodes and electrolytes is also a critical issue for solid polymer electrolytes. On one hand, poor and uneven solid/solid contacts at the electrode/electrolyte interfaces lead to high resistance and sluggish ionic transport kinetics. Furthermore, the volume change of the positive and negative electrodes in the charge/discharge process deteriorates the interfacial contacts, blocks the ion and electron transport through the interfaces, and greatly reduces the electrochemical reaction kinetics. On the other hand, the electrochemical windows of solid polymer electrolytes are usually narrow (＜4.5 V). During cycling, redox reactions are prone to occur at the electrode/electrolyte interfaces, causing battery failure. Solid polymer electrolytes have also poor thermal and mechanical stabilities. Therefore, design and synthesis of polymer-based solid electrolytes with excellent comprehensive performances and construction of fast and stable ion transport channels at the electrolyte/electrode interfaces are of great significance for the successful development of solid-state lithium metal batteries. This paper presents a brief review of the research progress in solid polymer electrolytes from two aspects: Improving the ionic conductivities of solid polymer electrolytes and enhancing the interfacial performance at electrolyte/electrode interfaces. First, targeted optimization strategies on ionic conductivities of solid polymer electrolytes, including constructing continuously aligned ionic transport paths and shortening the ionic transport distance, are summarized. Second, interface optimization strategies, including constructing wetting interfaces and synthesizing asymmetric electrolytes, are presented to reduce the interface resistance and improve the interfacial contact. Finally, perspectives on the development of solid polymer electrolytes and high-performance solid-state lithium metal batteries are discussed, and key research directions and advanced test methods are proposed. This review may provide a comprehensive understanding and further guidance for not only the material design of solid polymer electrolytes, but also the structural design of lithium metal batteries with favorable electrochemical and interfacial performances.