低密度聚乙烯
材料科学
竹子
护根物
差示扫描量热法
结晶度
复合材料
含水量
吸水率
复合数
聚乙烯
水分
挤压
结晶
线性低密度聚乙烯
透射率
塑料薄膜
微晶
单板
作者
Kun Liu,Xiaolu Wu,Zijie Zhong,Jinghuan Mai,Jiangtao Xu,Yan Xia,Chuanshuang Hu,Litao Guan,Mizi Fan,Yonghui Zhou
摘要
Conventional low‐density polyethylene (LDPE) agricultural mulch films can persist in soil and contribute to long‐term plastic residue accumulation. In this study, ultrafine bamboo flour (BF) was incorporated into LDPE using maleic‐anhydride‐grafted polyethylene (PE ‐g‐ MAH) as a compatibilizer, and BF/LDPE composite mulch films containing 2.5–12.5 wt% BF were continuously fabricated by blown‐film extrusion. The effects of BF content on the optical, barrier, mechanical, crystalline, thermal, microstructural, and preliminary agricultural performance of the films were systematically investigated. Increasing BF content markedly reduced UV transmittance likely associated with UV absorption by lignin‐derived aromatic and conjugated structures retained in BF, thereby improving UV‐shielding performance. Water vapor permeability increased with BF loading, but all films retained effective moisture‐barrier performance. Differential scanning calorimetry indicated that BF facilitated heterogeneous nucleation, as reflected by a modest increase in the LDPE crystallization peak temperature, while the calculated crystallinity showed a non‐monotonic dependence on BF loading. In preliminary 30‐day pea growth tests, all film‐covered treatments substantially reduced soil moisture loss, while BF‐PE‐7.5 exhibited the most favorable overall seedling growth. These results demonstrate that moderate BF incorporation, particularly at 7.5 and 10 wt%, provides a favorable balance of UV shielding, moisture retention, mechanical performance, and agricultural application potential in blown LDPE mulch films.
科研通智能强力驱动
Strongly Powered by AbleSci AI